Compliance Summary
Compliance Summary Tool
Transportation Modes
Service Functions
Regulations
All Topics
Please note: This summary is provided to help you understand the regulations. Consult the references provided for links to the full text of the regulations.

Used OilUsed Oil

Road Rail Air Water

This section covers federal and state regulations regarding used oil. In addition to the vehicle crankcase oil that is traditionally referred to as "used oil," the term "used oil" includes nearly any of the petroleum based or synthetic substances that are used for lubrication, heat transfer, or hydraulic fluid, including brake, transmission and power steering fluids. In some states it is referred to as "waste oil."


Who is covered by the regulations?

There are some exceptions, but most transportation facilities that generate used oil as a result of vehicle or machine maintenance are regulated as used oil generators and must comply with the applicable federal and state regulations. The used oil rules apply to nearly any of the petroleum based or synthetic substances that are used for lubrication, heat transfer, or hydraulic fluid. If you have any questions on what is and what is not considered used oil, check out EPA's Used Oil Guidance Table.

What is the purpose of the regulations?

Used oil is regulated because it contains harmful contaminants, such as benzene and lead, picked up during the operation of a vehicle or machine. The regulations require safe management and disposal of used oil, which protects not just drinking water, fish, and land, but also the workers in your shop. Also, federal and state used oil regulations encourage oil recycling, which conserves a valuable non-renewable resource.

Federal Regulations

Important: Federal law prohibits anyone from adding used motor oil, or used motor oil blended with diesel fuel, into the fuel system of model year 2007 or later diesel motor vehicle. More information.

EPA treats used oil differently from most other wastes because it can readily be recycled or burned for energy recovery. In fact, under the Federal Standards for Management of Used Oil (40 CFR 279), EPA presumes that used oil is to be recycled. As such, EPA has streamlined the rules to make it easier and less expensive for businesses to manage this material. However, if used oil is going to be disposed of, then it is not regulated under these "management standards." Instead, it is regulated like other potentially hazardous wastes (e.g., the generator must make a hazardous waste determination). For more information on hazardous waste rules, see the TERC Hazardous Waste section.

Also, it is important to note that if used oil is mixed with a listed hazardous waste (e.g., spent solvent) or if it contains more than 1,000 parts per million (ppm) of total halogens, then it is a hazardous waste and must be managed as such. The 1,000 ppm total halogens rule does not apply to metalworking fluids containing chlorinated paraffins, if the fluids are recycled.

The standards apply to all used oil handlers, regardless of the amount of the oil they handle. The following requirements relate mainly to storage and to cleaning up leaks and spills:

  • Label all containers and tanks as "Used Oil."
  • Keep containers and tanks in good condition. Don't allow tanks to rust, leak, or deteriorate. Fix structural defects immediately.
  • Never store used oil in anything other than tanks and storage containers. Tanks and containers storing used oil do not need to be RCRA permitted, however, as long as they are labeled and in good condition. Storage of used oil in lagoons, pits, or surface impoundments that are not permitted under RCRA is prohibited.
  • Take steps to prevent leaks and spills when transferring used oil. Have sorbent materials available on site.
  • If a spill or leak occurs, stop the oil from flowing at the source. If a leak from a container or tank can't be stopped, put the oil in another holding container or tank.
  • Contain spilled oil. For example, containment can be accomplished by erecting sorbent berms or by spreading a sorbent over the oil.
  • Clean up the oil and recycle the used oil as you would have before it was spilled. If recycling is not possible, you first must make sure the used oil is not a hazardous waste and dispose of it appropriately. All used cleanup materials, from rags to sorbent booms, that contain free-flowing used oil also must be handled according to the used oil management standards. Remember, all leaked and spilled oil collected during cleanup must be handled as used oil. If you are a used oil handler, you should become familiar with these cleanup methods. They may also be part of a spill response action plan.

Used oil must be transported by a transporter with an EPA ID number, unless:

  • The used oil is self-transported to a used oil collection center or generator-owned collection point by the generator in a vehicle owned by the generator and with no more than 55 gallons of used oil transported per load.
  • The used oil generator arranges for used oil to be transported under a contractual agreement where reclaimed oil is returned by the processor/re-refiner to the generator for use as a lubricant, cutting oil, or coolant. The contract (known as a "tolling arrangement") must indicate:
  • The type of used oil and the frequency of shipments
  • That the vehicle used to transport the used oil to the processing/re-refining facility and to deliver recycled used oil back to the generator is owned and operated by the used oil processor/re-refiner
  • That reclaimed oil will be returned to the generator

If you plan to burn used oil as a fuel, there are a couple of rules to follow:

  • Only the generator's used oil is allowed to be burned.
  • It must be burned in used oil-fired furnaces that have a maximum capacity of not more than 0.5 million (500,000) Btu per hour and ensure that the combustion gases from the heater are vented to the ambient air.

Before burning used oil, check with your state or local air quality division to inquire about air quality requirements, and check with state building code personnel to inquire about building codes for the installation and use of the burner.

If you store more than 1,320 gallons of used oil, in addition to the above used oil management standards, your oil storage area is regulated under the Spill Prevention, Control and Countermeasure (SPCC) rule (see SPCC requirements), To meet these requirements, generators typically need a secondary containment system to prevent used oil from contaminating the environment.

State Regulations

Most states have adopted the federal management standards for used oil. However, some states use slightly different definitions of used oil or have additional rules that may apply to your facility. For example, in California businesses generating used oil are required to meet all hazardous waste generator requirements and if you hire somebody to transport your used oil, California law requires that the used oil be transported by a registered hazardous waste transporter using a hazardous waste manifest.

Therefore, it is extremely important to know and understand your state regulations governing the management of used oil. The links below will take you to used oil regulatory information and guidance for your state. Be certain to contact your state or local environmental agency to determine your best course of action.

AL AK AZ AR CA CO CT DE FL GA
HI ID IL IN IA KS KY LA ME MD
MA MI MS MO MN MT NE NV NH NJ
NM NY NC ND OH OK OR PA RI SC
SD TN TX UT VT VA WA WV WI WY

Note: For some states, no specific program information on used oil was located. In such cases, the "Used Oil Program Information" links to the most applicable division within the state environmental agency. To report any errors or suggest additions to this information, please email the Center.

Alabama

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Alaska

Used Oil Program Information

Arizona

Used Oil Program Information

Used Oil Regulations

Arkansas

Used Oil Program Information

Used Oil Compliance Guidance

California

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Colorado

Used Oil Program Information

Used Oil Compliance Guidance

Connecticut

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Delaware

Used Oil Program Information

Used Oil Regulations

Florida

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Georgia

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Hawaii

Used Oil Program Information

Idaho

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Illinois

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Indiana

Used Oil Program Information

Used Oil Regulations

Iowa

Used Oil Program Information

Used Oil Compliance Guidance

Kansas

Used Oil Program Information

Used Oil Regulations

Kentucky

Used Oil Program Information

Used Oil Regulations

Louisiana

Used Oil Program Information

Used Oil Compliance Guidance

Maine

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Maryland

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Massachusetts

Used Oil Program Information

Michigan

Used Oil Program Information

Used Oil Regulations

Mississippi

Used Oil Program Information

Used Oil Compliance Guidance

Missouri

Used Oil Program Information

Used Oil Regulations

Minnesota

Used Oil Program Information

Used Oil Regulations

Montana

Used Oil Program Information

Nebraska

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Nevada

Used Oil Program Information

New Hampshire

Used Oil Program Information

Used Oil Regulations

New Jersey

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

New Mexico

Used Oil Program Information

Used Oil Regulations

New York

Used Oil Program Information

Used Oil Compliance Guidance

North Carolina

Used Oil Program Information

Used Oil Regulations

North Dakota

Used Oil Program Information

Used Oil Compliance Guidance

Ohio

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Oklahoma

Used Oil Program Information

Used Oil Compliance Guidance

Oregon

Used Oil Program Information

Used Oil Compliance Guidance

Pennsylvania

Used Oil Program Information

Rhode Island

Used Oil Program Information

Used Oil Regulations

South Carolina

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

South Dakota

Used Oil Program Information

Tennessee

Used Oil Program Information

Used Oil Regulations

Texas

Used Oil Program Information

Used Oil Compliance Guidance

Utah

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Vermont

Used Oil Program Information

Used Oil Regulations

Virginia

Used Oil Program Information

Used Oil Regulations

Used Oil Compliance Guidance

Washington

Used Oil Program Information

Used Oil Compliance Guidance

West Virginia

Used Oil Program Information

Used Oil Compliance Guidance

Wisconsin

Used Oil Program Information

Wyoming

Used Oil Program Information


Compliance Options

Compliance options available to used oil generators depend on which state they are located in. Although most states follow the federal regulations for used oil management and transportation, many states have slightly different or more stringent rules relating to registration, transportation management, reporting and recordkeeping. Be certain to check with your environmental state agency; most states have published useful compliance guidance documents as shown above.

Best Practices

Federal and state used oil regulations include management practices that must be followed. The federal management practices have been discussed above. Also, most states have published management practices in guidance documents. Examples of available resources include:

In addition to best practices for managing used oil, fleet owners should consider ways of reducing the volume of used oil generated. This can be achieved by testing engine oil to determine when it must be replaced, rather than performing a change based on mileage or hours of use. Also, use of improved oil filtration, such as high efficiency or by-pass filters, can significantly reduce the need to change engine oil. Less frequent oil changes will also help to keep fleets on the road and reduce motor oil and labor costs.

  • Oil Life Extension (EPA Region 9). This fact sheet describes how a testing program can extend engine oil life and thus lower oil consumption, reduce used oil generation, and decrease operating costs with no risk to your vehicles.
  • By-Pass Filters. Bypass filters extend oil life through improved filtration. They may also improve engine life and fuel economy.
  • CalEPA Extended Oil Change Intervals. A recent study provides strong evidence that oil analysis programs, higher quality motor oils, and more efficient filters will protect engines from wear and lead to significant cost savings. Oil analysis helps to determine the optimum oil change frequency and can provide early diagnostics for engine wear.

More Resources

40 CFR Part 279 - Standards for the Management of Used Oil

Managing Used Oil: Advice for Small Businesses - EPA fact sheet.

A fact sheet on used oil management provides a useful introduction to some of the technical issues involved in determining the hazardous waste classification status of various kinds of used oil, including oil-based metalworking fluids.

TERC Home